HomeStore

SharkBite UR514A End Stop, 1/2 Inch, Brass

Product image 1

SharkBite UR514A End Stop, 1/2 Inch, Brass

SharkBite End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required.

Highlights:

  • Material: Brass
  • End 1 Diameter: 1/2 inch
  • End 1 Type: Push
  • Average Lead Content: Less than 0.25 %
  • Maximum Pressure: 200 psi
  • Use for new installation and repair of potable water distribution systems
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • All components are chloramine resistant
  • Traceability - All products are stamped with a manufacturing date
  • Approved for burial
  • Corrosion resistant
  • No soldering, clamps, unions or glue required
  • Connects copper, PEX and CPVC pipe in any combination
  • Packaging Type: Bagged
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

SharkBite End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required.

Highlights:

  • Material: Brass
  • End 1 Diameter: 1/2 inch
  • End 1 Type: Push
  • Average Lead Content: Less than 0.25 %
  • Maximum Pressure: 200 psi
  • Use for new installation and repair of potable water distribution systems
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • All components are chloramine resistant
  • Traceability - All products are stamped with a manufacturing date
  • Approved for burial
  • Corrosion resistant
  • No soldering, clamps, unions or glue required
  • Connects copper, PEX and CPVC pipe in any combination
  • Packaging Type: Bagged
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
$12.45
SharkBite UR514A End Stop, 1/2 Inch, Brass—
$12.45

Description

SharkBite End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required.

Highlights:

  • Material: Brass
  • End 1 Diameter: 1/2 inch
  • End 1 Type: Push
  • Average Lead Content: Less than 0.25 %
  • Maximum Pressure: 200 psi
  • Use for new installation and repair of potable water distribution systems
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • All components are chloramine resistant
  • Traceability - All products are stamped with a manufacturing date
  • Approved for burial
  • Corrosion resistant
  • No soldering, clamps, unions or glue required
  • Connects copper, PEX and CPVC pipe in any combination
  • Packaging Type: Bagged
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
SharkBite UR514A End Stop, 1/2 Inch, Brass | ToolBox Supply